Software 2000

home *** CD-ROM | disk | FTP | other *** search

/ Software 2000 / Software 2000 Volume 1 (Disc 1 of 2).iso / utilities / u111.dms / in.adf / Rimdoc.doc < prev next >

Wrap

Text File | 1999-12-26 | 134.9 KB | 4,430 lines

PC - Relational Information Management PC-RIM V5 Manual DEFINITIONS ATTRIBUTE: An attribute is a 1-8 character alphanumeric name used to identify a specific column of a relation. DOMAIN: A domain is the set of values which are permissible in a column of a two-dimensional table of data (relation). KEY: An attribute may be specified to be "KEY". This specification will cause RIM to build an index for the attribute. Under certain conditions, this index will greatly improve the system efficiency for queries and updates. RELATION: A relation is a two-dimensional table of data. The column headings are the attributes of the relation and the rows are the data occurences (tuples). ROW: A row is the set of values in a row of a two- dimensional table (relation). A row is sometimes referred to as a tuple. SCHEMA: The schema is the definition of the relations and their attributes that comprise the data base. The relation passwords and constraint rules also are part of the schema. Page 1 SUMMARY This document is the user's guide (MSDOS/8088) for the Relational Information Management System, Version 5 (RIM-5). The information presented consists of instructions for using RIM-5 as a standalone system and for using RIM-5 in conjunction with an application program. Section 1.0 presents the method of implementation and access for RIM-5, a discussion of the files used by RIM-5, and the general syntax of the RIM-5 command language. Section 2.0 presents instructions for the use of RIM-5 as a standalone system in both menu and command modes. In the menu mode, you are prompted for the inputs required to create, update, and/or query the data base. The command mode, as an alternative, requires the direct input of RIM-5 commands to create, update, and/or query the data base. A discussion of all the available RIM-5 command is presented in this section. Section 3.0 presents the instructions for the application program interface. Any programming language that can call FORTRAN subroutines can be used. The appendices present a summary of the RIM-5 commands, a summary of the application program interface, a sample RIM FORTRAN program, a list of the current limitations, and a discussion of the LXLREC free field input routine. Page 2 1.0 OVERVIEW The Relational Information Management (RIM) System was originally developed as a prototype data base management system by Dennis L. Comfort and Wayne J. Erickson at The Boeing Company under NASA Contract NAS1-14700 (IPAD). Mr. Erickson at the University of Washington, and Frederick P. Gray at The Boeing Company made en- hancements to the system which culminated in RIM Version 4 (RIM- 4) . RIM-5, which is the version of RIM described in this document, was developed by Mr. Erickson for NASA and Mr. Gray and Geofferey Von Limbach for Boeing. RIM is based upon the relational algebra model for data management and has been used for both en- gineering and business data. The system is available as a stand- alone system and through an application program interface. The standalone system may be executed in two modes: menu or command. The menu mode prompts the user for the input required to create, update, and/or query the data base. The command mode requires the direct input of RIM commands. (IPAD stands for Integrated Programs for Aerospace Design if anyone is interested...) RIM-5 includes several enhancements relative to RIM-4, including: . highly portable FORTAN code . additional scientific attribute types for vectors and matrices . variable length attributes . improved sort option . improved where clause . an initial set of report writing commands . introduction of tolerance for floating point numbers . additional schema modification commands . enhanced FORTAN interface . RIM-to-RIM communications file To the interactive/batch user the RIM-5 creation, update, and query are, for the most part, identical to RIM-4. Data bases form RIM-4 must be reloaded for RIM-5, however. In addition, the ap- plication program interface has been expanded and modified to ac- comodate increased capabilities. Page 3 1.1 IMPLEMENTATION AND ACCESS RIM is written entirely in FORTRAN 77. It requires approximately 300000 (decimal) bytes of virtual memory when run as a standalone program. Access to RIM depends on the execution method desired. To execute the standalone system, the following control statement is needed: RUN [rimact ]RIM where rimact is the name of the user directory on which RIMABS and the RIM HELP data base files reside. To use the RIM application program interface you need to link RIMLIB to your application program. This can be done with the following instruction: LINK JOBA,[rimact]RIMLIB/LIB where rimact is the name of the user directory on which RIMLIB resides. JOBA is the name of the object file of your application program. 1.2 DATA BASE FILES Each data base consists of three RIM-generated files whose logical names are formed by suffixing the data base name with a 1,2, and 3. The first file contains directory data, the second file con- tains the actual data for each relation, and the third file con- tains key element pointers. The default type for these files are "DAT". RIM uses logical files FOR005 and FOR006 for input and output. If your data base files do not reside on your directory with names equal to the logical data base files names, you must use the as- sign control statements prior to the RIM execution to assign required names to your data base files. You may also assign your input and outout files to files other than FOR005 and FOR006 if desired. 1.3 GENERAL COMMAND SYNTAX RIM is used by entering commands, (which start with keywords) in response to input prompts (which vary according to the submodule in use). Three of the commands (DEFINE, HELP, and LOAD), are used to enter submodules which have their own sets of commands for defining and loading a data base. In describing commands, the following conventions are used: relname Page 4 or name of a relation(s) relname1,relname2,... attname or name of an attribute(s) attname1,attname2,... value or actual values(s) value1,value2,... (value may be a text string, scalar, vector, or matrix) All relation and attribute names must contain at least 1 and no more than 8 alphanumeric characters. Many of the commands in RIM have optional parts. These optional parts are enclosed in square brackets. [THIS IS OPTIONAL] Some keywords in the commands are selected from a list of accep- table keywords. These keywords are in a vertical list with the first choice enclosed in braces. {CHOOSE} ONE OF THESE RIM command keywords may be abbreviated. At least the first 3 characters in the keywords are required. The following are equivalent: 1) SELECT, FROM, WHERE, DELETE DUPLICATES 2) SELEC, FRO, WHER, DELETE DUP 3) SEL, FRO, WHE, DEL DUP All commands in RIM are entered in a free-field format with blanks and commas as separators. the following contains a short descrip- tion of RIM conventions and data generation facilities. An exten- sive description, intended for the experienced RIM user, can be found in Appendix E. Keywords and data values are separated by blanks or commas. If a command is too long for one 80 character line, it may be continued on succeeding lines by entering "+" as the last character of the preceding line. RIM remembers each previous command. This en- ables you to re-use all or part of the previous command. This is done by using an asterisk to indicate which items of the previous Page 5 command are to be re-used. A single asterisk means re-use the corresponding single item of the previous record. An asterisk followed by a number n means re-use the next n corresponding items. Two asterisks mean re-use all remaining corresponding items. The following are all equivalent: 1) THIS IS A COMMAND 2) THIS + IS + A + COMMAND 3) * IS,A COMMAND 4) THIS *2 COMMAND 5) THIS ** Multiple commands may be entered on one line separated by a semi- colon or $. THIS IS THE FIRST ; THIS IS THE SECOND $ THIS IS THE THIRD Comments may be placed anywhere within a command by enclosing the comment between the characters *( and ). *(THIS IS A COMMENT) THIS IS NOT When numeric data is to be interpreted as text (alphanumeric) data, the numerals must be enclosed by quotation marks. "1234" When entering text strings which contain embedded blanks or commas, the entire string must be enclosed by quotation marks. "THIS IS A TEXT STRING" A text string may require continuation on one or more lines. The + sign continuation can then be used within the quotation marks. It is not recommended that you use leading blanks in text strings. Text which does not have embedded blanks or commas does not require quotes. Integer data is input as a string of digits without a decimal point. A sign may precede the digits. 123, -63, +56, 0 Page 6 Real or floating point numbers must include a decimal point or E for the exponent. If a decimal point is not present, the E must be preceded by an integer. 1.3, .005, 0., 6.E-1, 6E-1, 0.60, -23.45 The size of real numbers is limited to the range between 1.0E-38 and 1.0E+38. Page 7 2.0 RIM EXECUTION Execution of RIM as a standalone program can be effective in two modes, command mode or menu mode. The command mode is used when RIM is executed in the batch environment or for interactive users who wish to bypass the menu dialogue. A detailed description of the commands are given in section 2.1. The menu mode offers as- sistance to inexperienced users. An overview of this mode is discussed in section 2.2 and a more detailed description of the menu mode dialogue is given in section 2.3. The interactive user may switch freely between menu mode and command mode. When executing RIM interactively, the first output to your display will be: BEGIN RIM ---- VAX VERSION 5.0 UDXX YY/MM/DD HH.MM.SS RIM COMMAND MODE ENTER "MENU" FOR MENU MODE UDXX identifies the update level of RIM. The date and time stamp indicate current date and time. At the start of execution you are in the command mode but you may switch immediately to the menu mode as indicated. Page 8 2.1 RIM COMMANDS This section presents a summary of the RIM commands. You are restricted from using certain commands based on the knowledge of assigned passwords. If no passwords are assigned to the relations by the data base owner, there are no command restrictions (the DEFINE submodule excepted). See figure 2.1-1. 2.1.1 General Commands HELP Command The HELP command allows you to obtain: a description of the available RIM commands, a discussion of the general command syntax, a summary of all available commands, and general news about the RIM system. HELP is available at any time during execution except when in the menu mode. To receive help when in the command mode enter: HELP [{command name}] RIM SYNTAX WHERE SUMMARY NEWS SORT INPUT FORMAT Page 9 CURRENT PASSWORD SECTION NUMBER COMMAND OWNER MODIFY READ NONE . 2.4.1 . GENERAL X X X X . 2.4.2 . DEFINE X . 2.4.3 . LOAD X X . 2.4.4 . DATA BASE QUERY X X X . 2.4.5 . SCHEMA QUERY X X 2 X 2 . 2.4.6 . COMPUTATION X X X . 2.4.7 . DATA BASE MODIFICATION X X . 2.4.8 . SCHEMA MODIFICATION X X 1 . 2.4.9 . RELATIONAL ALGEBRA X X . 2.4.10 . REPORT GENERATION X X X . 2.4.11 . COMMUNICATION X X 1 EXCEPT CHANGE OWNER 2 EXCEPT PRINT RULES Page 10 The HELP submodule available inside the HELP submodule are identical to the HELP commands except that the keyword HELP is omitted. The HELP submodule displays information one screen at a time. After each screen you will have the option to continue displaying the text by entering * or to return to the HELP submodule by entering QUIT. You will remain in the submodule until you enter an END command which will return to the command mode. MENU Command The MENU command places you in the menu mode. It may be entered at any point when in command mode except when in the DEFINE, HELP, or LOAD submodules. The menu mode is particularly useful for schema definition and data loading. MENU Page 11 OPEN Command The OPEN command is required whenever an existing data base is to be used. You specify the name of the data base. RIM uses the name of the data base to form the names of the three files which contain the data base. The data base files must either reside in your dictionary or you must make a logical file assignment prior to RIM execution. OPEN dbname Only one RIM data base may be open at a time (if you don't close the present data base before opening a new one, RIM will auto- matically close the present data base.) The OPEN command must be issued before any commands that require data from the data base can be processed. CLOSE Command The CLOSE command permits you to close a RIM data base without leaving RIM. This enables you to close one data base, then open or define a different one, all within one RIM session. This command is not needed if only one RIM data base is acces- sed during a RIM session. This command results in update of the data base files to reflect all changes you have made to the data base. CLOSE Note: the current data base will be closed for you when you leave RIM by issuing an EXIT command. USER Command This command is used to specify your user password to RIM. Your user password is used to check against read and modify passwords specified for the relations. Each time this com- mand is issued, the new password replaces the current user password. The default password is the word NONE. USER password INPUT Command This command is used to specify the name of a file which contains the RIM commands and/or input data. Alternate input file names may be assigned as often as required. The use of this command allows you to define command pro- cedures on a file and then have RIM execute the set of commands without user interaction. INPUT filename Page 12 The last command on the alternate input file should be INPUT INPUT which returns input to the batch input file or your terminal. INPUT TERMINAL will, for interactive jobs, do the same thing. OUTPUT Command This command is used to specify the name of the output file. Specifying a file other than OUTPUT will result in the output from the RIM commands being placed on the specified file name. The output file name may be changed as often as desired. The use of this command allows the interactive user to get an offline hardcopy output from RIM. OUTPUT filename OUTPUT OUTPUT will return the output to the batch output file or your terminal. OUTPUT TERMINAL will, for interactive jobs, do the same thing. ECHO Command This command is used to control the printing of your input commands on the output file. Default is for ECHO printing enter: ECHO NOECHO Command The NOECHO command turns off ECHO printing. NOECHO TOLERANCE Command For attributes which contain floating point numbers, a tolerance may be used to qualify equality, nonequality and order. The tol- erance applies to any real or double precision number you use in a WHERE clause. If A is an attribute with value a, and r is a user specified number used in a WHERE clause, and t a tolerance (posi- tive, zero, negative), the following are true conditions: A EQ r if and only if r-t <= a <= r+t A NE r if and only if a < r-t or a > r+t A GT r if and only if a > r-t A GE r if and only if a => r-t A LT r if and only if a < r+t Page 13 A LE r if and only if a <= r+t If t is a percentage tolerance, t is to be replaced with t x r/100 in the above expressions to define true conditions for percentage tolerances. TOLERANCE tol [PERCENT] where tol is the tolerance and the presence or absence of the keyword PERCENT indicates whether tol is a percentage tolerance or an absolute tolerance. The TOLERANCE command can be used as many times as desired to reset the tolerance. A tolerance stays in effect for a session until a new tolerance is speci- fied. The default value for tolerance is 0. . NOCHECK Command Rule checking applies to the CHANGE and LOAD commands. Default is that rules, if defined, are enforced. The NOCHECK command suppresses the ruler checking. NOCHECK CHECK command The CHECK command turns on rule checking. The CHECK and NOCHECK commands may be issued as many times as required anywhere in the input stream. CHECK EXIT Command To leave RIM without dropping your current data base enter: {EXIT} QUIT This command closes your current data base. Data needed by your data bases is copied from the incore working areas to the logical files whose names were determined by the OPEN command or by the data base name designated in the DEFINE submodule. RELOAD Command The RELOAD command is used whenever you want to rebuild the data files of your data base to recover unused space created by row deletions, relation removals, and certain attribute changes. When a row is deleted or a relation removed, its space is not reused until you issue this command. In addition, if a variable length Page 14 attribute is modified so that it increases in length, the row is deleted and replaced with a new one. the old row becomes unused space. If your data base has any KEY attributes, then the access pointer files maintained for those attributes are also rebuilt. The syntax for the command is: RELOAD 2.1.2 Define Submodule Commands Define Submodule Commands The Define submodule (prompt = D> ) commands are used to define the structure of the data base and are used in the sequence described below. The definition of the data base is called the schema. The schema name is the name of the data base and forms the essential part of the names of the files used for the data base. Attributes, relations, passwords, and constraints (rules) are defined using this submodule. The naming conventions for schema definition are described in section 2.3.3. To access this submodule enter: DEFINE dbname You must identify the name of the data base whose definition you are going to create or expand by specifying the schema name. This name is used to form the name of the files used to store the data base tables. The dbname, when augmented with a single number must be a legal filename. Once dbname is specified you must identify the owner password of the definition. OWNER password If the data base already exists and you want to define additional attributes or relations, "password" is checked against the existing owner password. ATTRIBUTES attname type1 [{length}] [KEY] VAR attname type2 [{row,col}] [KEY] row,VAR VAR,VAR - - - Page 15 The attribute definitions are ended when you specify one of the keywords RELATIONS, PASSWORDS or RULES Type1 Attributes: RIM supports seven data types of "type1": real (floating point), integer, text, double precision, real vectors, integer vectors and double precision vectors. You must enter REAL, INT, TEXT, DOUB, RVEC,IVEC or DVEC for type1. The default length is one number, except for TEXT for which it is 8 characters. The length is speci- fied in number of values and characters respectively. VAR indicates variable length. The optional KEY specification causes an index file to be built for the attributes which is used by RIM to quickly find qualifying rows for retrievals and updates. The default is that such an index file is not built (non-key attribute). You should consider the cost of building and storing index file data versus the benefits you will obtain from quicker retrievals when deciding if a KEY declara- tion should be used. No specific rules can be given here, experience should be used to judge. An attribute can be changed from KEY to NON- KEY or vice-versa by using the BUILD KEY and DELETE KEY commands des- cribed in section 2.1.8. For large data bases (more than 1,000 rows) , experience has shown that it is most efficient not to specify a KEY in the DEFINE submodule but rather to load the data without keys and to later cause index files to be built using the BUILD KEY command. The greater the number of keys, the more efficient this method is. Type2 Attributes: RIM supports three data types of "type2": real matrices, integer matrices or double precision matrices. You must enter RMAT, IMAT or DMAT for type2. The matrices can be of fixed size, have variable column dimension or variable row and column dimensions. You enter the row dimension first, followed by the column dimension. Default dimension is 1x1. The key-word KEY has the same meaning as for "type1" attributes. To define relations enter: RELATIONS relname WITH attname1 [attname2...] - - - The relation definitions are ended by specifying one of the key- words ATTRIBUTES, PASSWORDS, RULES, or END which start the other sections of the DEFINE submodule or finishes the schema definition. Page 16 The attributes must be listed in the order in which they are to appear in the relation. No attributes can be used which have not been previously defined, either in the current attributes definition subsection or in a previous definition of this data base. Attri- butes which are defined but not included in a relation will not be- come part of the RIM schema. A RIM data base must have attributes and relations defined, but passwords and constraint rules are optional. If read or modify passwords are desired enter: PASSWORDS {READ PASSWORD} FOR relname IS password RPW {MODIFY PASSWORD} FOR relname IS password MPW - - - The password definitions are ended by specifying one of the key- words ATTRIBUTES, RELATIONS, RULES, or END which start the other sections of the DEFINE submodule or finishes the data base defini- tion. Passwords can be any string of alphanumeric characters up to 8 characters long. When you are doing queries, loads, or modi- fications, the current password is specified by the USER command. If this password does not match the read, modify, or owner pass- word for a given relation, you can query that relation. If this password does not match the modify or owner password, you cannot load or modify the relation. Constraint rules are another optional section of the DEFINE sub- module. If rules are specified, they are used during the loading process or during CHANGE commands to screen out rows which do not meet the constraint rules. Rules are specified by relation. At most 10 rules may be specified for a single relation. There are several options available in the rule definition section. To define constraint rules enter: RULES attname [IN relname] {EQ} value [ {AND} attname ...] NE OR GT GE LT LE or Page 17 attname1 IN relname {EQA} attname [ {AND} ...] NEA OR GTA LTA LEA where: EQ = Equals NE = Not equal to GT = Greater than GE = Greater than or equal to LT = Less than LE = Less than or equal to EQA = Equals attribute NEA = Not equal to attribute LTA = Less than attribute LEA = Less than or equal to attribute The rule definitions are ended by specifying one of the key- words ATTRIBUTES, RELATIONS, PASSWORDS, or END which start the other sections of the DEFINE submodule or finishes the schema definition. Attributes referenced in the rule defini- tions must have been previously defined. By specifying rules, you can restrict an attribute to a range of values or require that the value of an attribute in one relation have a specified relationship to the values of an attribute in the same or different relation. The comparison operators ending in A are used when the comparison is to existing attribute values rather than to a specified constant. A rule expression may contain a maximum of 9 Boolean operators. The method used for constraint checking is that the first attribute mentioned in the rule is taken from the input (LOAD or CHANGE command) data and checked against the re- mainder of the rule expression using existing values in the data base. To finish the schema definition you enter the following keyword and leave the DEFINE submodule: END Example of DEFINE submodule commands: DEFINE RIMDS OWNER ME ATTRIBUTES MODEL TEXT KEY WEIGHT REAL NUMPASS INT CARRIER TEXT FLIGHTNO INT Page 18 NAME TEXT KEY AGE INT UPDATE IMAT 4,VAR RELATIONS AIRPLANE WITH MODEL WEIGHT NUMPASS FLIGHTS WITH CARRIER FLIGHTNO MODEL UPDATE PEOPLE WITH NAME AGE PASSWORDS MPW FOR FLIGHTS IS AGENT RPW FOR PEOPLE IS BLUE RULES MODEL IN FLIGHTS EQA MODEL IN AIRPLANE AGE GT 21 AND AGE LT 65 NUMPASS IN AIRPLANE LE 350 2.1.3 Load Submodule Commands The LOAD submodule (prompt = L>) commands are used to add rows to a newly defined relation or to add rows to a relation which already contains data. To access this submodule enter: LOAD relname You may now load rows into the relation, one row at a time, by entering data values in an order corresponding to the attribute order: value1 value2 ... valuen Page 19 The method used to input values for the different attribute types is shown below: Attribute Length or Type Dimension Valuei Remark REAL,INT n n=>1 (val1 ... valn) Parentheses DOUB,RVEC optional IVEC,DVEC REAL,INT VAR (val1 val2 ...) Parentheses DOUB,RVEC required IVEC,DVEC TEXT any "text string" In many cases, (see section 1.3) " " is optional RMAT,IMAT m,n ((r1c1...rmc1)(r1c2...) + Columnwise DMAT ...rmcn)) Parentheses optional RMAT,IMAT m,VAR ((r1c1...) (r1c2...)...)) Columnwise DMAT or Parentheses VAR,VAR required ----------------------------------------------------------------------- To finish data loading you enter: END Multiple relations may be loaded from within the LOAD submodule by re-entering the LOAD command instead of the END command. Example of LOAD submodule commands: USER AGENT LOAD AIRPLANE DC9 87000. 110 747SP 200000. 350 LOAD PEOPLE BOB 30 JOE 32 ALICE 29 LOAD FLIGHTS UAL 16 "757" ((1,2,3,4) (4,5,6,7)) *3 ((2,4,5,8)(1,2,3,4) (4,5,6,7)) END Page 20 If the value for an attribute is unknown, you enter the characters -0- for the missing value or use two successive commas. L1011 -0- -0- 250 L1011,,,250 These two input entries have identical meaning. 2.1.4 Commands for Querying the Data Base SELECT Command The SELECT command is used for displaying or printing data from one relation. It has many options. To print all the data from a relation: SELECT ALL FROM relname To print selected attribute values from all rows in a relation: SELECT attname1 [ attname2 ... attnamen ] FROM relname The above command will print up to 20 attributes in any order. The number of attributes is limited by space available in a line. As a rule of thumb, 7 attributes may be selected when running at an 80 character interactive terminal and 11 when running in the batch mode or at an 132 character terminal. For variable length attributes or for attributes of fixed length that would otherwise not fit on aline alone or together with other attributes, you may format the output using the optional field width control: SELECT attname1 [ =fw1 ] [ attname2 [ =fw2 ] ... ] + FROM fwi is the output field width for attnamei. For a text type attribute, fwi is the width of the output paragraph in number of characters, for other attribute types it is the number of values. When the field width option is used, RIM will use as many output lines as required for each row. Defaults are rather complex. For a fixed length attribute, other than matrix, no paragraphing is attempted. For a fixed length matrix, the default paragraph width is a full row. The system will use the field width required to display the value(s) of the attribute. For a variable length attribute of type TEXT, the default is a display of a maximum of 40 characters with paragraphing. For variable length attributes of types REAL, INT, DOUB, the default is 4 elements with truncation. For variable Page 21 length vector type attributes, the default is 4 elements with paragraphing (no truncation). For variable length matrix at- tributes the default is 4 elements with paragraphing (no trun- cation). A row starts on a new line. Whether field width is specified or not, the system will display the dimension of variable length vectors and matrices using one of the output positions. However, should you specify a width of one for such an attribute, the row and column dimensions will not be displayed. Further information about line width, number of lines per page, defaults and user specifications is given in section 2.1.10 as part of the RIM report writing features. When paragraphing TEXT type attributes, RIM will identify sub- strings of text separated by blanks. The substring is placed on the current line if there is space available. If the current line contains less than four characters, the number of characters that fit on the line are removed from (the front of) the substring and put on the line (without hyphen) and continued on the next line. If the current line contains more than four characters, the substring will be placed on the next line. Examples of SELECT command: SELECT ivecvar FROM rel1 DIM IVECVAR ----------------------------------- 7 1 2 3 4 5 6 7 1 10 SELECT imatvv FROM rel1 ROW COL IMATVV --------------------------------------- 2 5 11 12 13 14 15 21 22 23 24 25 1 1 11 Page 22 SELECT textv = 9 FROM rel 1 TEXTV ------------ THIS IS AN EXAMPL E OF WRAPAROUN D OF TEXT THIS IS ANOTHER EXAMPLE OF TEXT The attribute name attnamei may be replaced by its correspond- ing attribute number (attnum1). The attribute number is deter- mined by the position of the attribute in the relation. Specific elements of a vector or a matrix may also be designated. The general form of the unconditional SELECT command is: SELECT {attname1 [ = fw1 ]} [attname2 [= fw2] ...] + attnum1 [ = fw1 ] attname1(i) attname1(i,j) attnum1(i) attnum1(i,j) ALL FROM relname To print all attributes from a relation where certain conditions are met: SELECT ALL FROM relname WHERE condition1 [ {AND} condition2 ...] OR Up to ten conditions may be combined using the Boolean operators AND/OR. The conditions are combined from left to right. Each condition may be one of the following forms: attname EXISTS attname FAILS attname EQ MAX attname EQ MIN attname EQ value attname EQS value attname NE value attname GT value attname GE value attname LT value Page 23 attname LE value attname EQ list attname NE list attname1 EQA attname2 attname1 NEA attname2 attname1 GTA attname2 attname1 GEA attname2 attname1 LTA attname2 attname1 LEA attname2 ROWS EQ rownumber ROWS NE rownumber ROWS LT rownumber ROWS LE rownumber ROWS GE rownumber ROWS GT rownumber ROWS EQ list ROWS NE list LIMIT EQ number where: EQ = Equals EQS = Contains the text string NE = Not equals GT = Greater than GE = Greater than or equal to LT = Less than LE = Less than or equal to EQA = Equals attribute NEA = Not equals attribute GTA = Greater than attribute GEA = Greater than or equal to attribute LTA = Less than attribute LEA = Less than or equal to attribute MAX = Maximum value MIN = Minimum value Attname, attname1, attname2 may refer to an element of a vector or a matrix. When an attribute has been assigned a value, then EXISTS will qualify those attributes. If an attribute has not been assigned a value, but was loaded with -0-, then FAILS will qualify those attributes. MAX and MIN comparison can only be made for integer, real and double precision attributes of fixed length equal to 1. Value in a comparison statement must follow the rules of section 2.1.3 for vectors and matrices, i.e., if the attribute is of variable length or dimension, parentheses must be used to input a vector or a matrix value or a list of vector and matrix values. Page 24 EQS applies to text strings only. In such a comparison, value is a text string and the comparison is true if value is found as a substring anywhere within the attribute for which comparison is requested. NE comparison when applied to matrices or vectors is true if the length or dimension is different from the length or dimension of your specified comparison vector or matrix or if any vector or matrix elements differs. GT and LT comparisons for vector and matrix attributes are "lexicographical", i.e. a comparison is made element by element (columnwise for matrices) and continued until a true or false condition is detected. If no such condition is detected after the last element is checked, a false condition is assumed. Comparison is made only for vectors and matrices of the same sizes as comparison data. GE and LE comparisons for vector and matrix attributes are similar to GT and LT comparisons except it continues if an equal condi- tion is detected and if no condition is detected after the last element is checked, a true condition is assumed. Comparison rules for vector attributes apply also to real, integer and double precision attributes of fixed or variable length. A list is a simple list (a1, a2, a3,...,an) of values. The comparison key words ending in A are used when comparing the value of one attribute to the value of another attribute in the same row of the relation. ROWS refer to row numbers in a relation. Note that a relation is loaded in input row order but that subsequent operations (changes) to the data base may cause the order of the rows to change. When the LIMIT clause is used, only the first LIMIT number of the rows that otherwise would qualify will actually qualify. Processing the WHERE condition can be speeded up greatly if index processing is used. Index processing involves using the indices created for KEY attributes rather than looking at each row of a relation to find the rows qualified by the WHERE conditions. Index processing will be used when the following are all true: 1) The last condition uses an attribute which is KEY 2) The last condition uses EQ 3) The last condition is not combined by OR with the other conditions. Page 25 The output can be sorted by specifying sorting attributes. The sorting order is user specified with default low to high. SELECT ... FROM relname SORTED BY attname1 [ {=A} ] { attname2 [={A} ] ...] + D D [ WHERE ...] A and D stands for ascending and descending order respectively. If a sort on more than one attribute is requested, the output will first be ordered according to the first mentioned attribute. In case there are duplicates for the first sort attribute, these will be ordered by the second sort attribute, duplicates within this by the third and so on. A maximum of 5 sorts may be specified. When multiple attributes are used, ascending and descending order may be used in any combination. Variable length attributes may not be used as sort attributes. When fixed length attributes are used as sort attributes, only the first 20 characters and the first value is used for sort. All these options can be described using the following general syntax: SELECT {attname1 [ = fw1 ] [...attname [ = fwn ] ] } + attnum1... attname1(i)... attname1(i,j)... attnum1(i)... attnum1(i,j)... ALL FROM relname + [SORTED BY attname [{=A} ]... ] + D [WHERE condition1 [{AND} condition2 ... ]] OR If the sum of the lengths (or fwi) of the attributes requested exceeds the line capacity, the data line will be truncated. See section 2.1.10 for further expanation of line width control. TALLY Command The TALLY command prints a tally for an attribute giving each unique value and the number of times it occurs in a relation. The tally is ordered ascending or descending per user input. Default is ascending. The WHERE clause is optional and uses the same syntax as in the SELECT command. TALLY attname [{=A}] FROM relname [ WHERE ... ] D Page 26 Examples of SELECT and TALLY commands: SELECT ALL FROM AIRPLANE SELECT MODEL FROM AIRPLANE SELECT ALL FROM AIRPLANE WHERE WEIGHT GT 100000. *8 AND NUMPASS LT 200 SELECT AGE FROM PEOPLE WHERE NAME EQ BOB SELECT ALL FROM AIRPLANE SORTED BY MODEL=D TALLY MODEL FROM FLIGHTS TALLY MODEL FROM FLIGHTS WHERE CARRIER EQ UNITED SELECT ALL FROM DIMENS WHERE HEIGHT GTA WIDTH SELECT FILE TITLE=4 OWNER FROM PFDATA 2.1.5 Commands for Querying the Schema When you use any of these commands, RIM will display only the data you are authorized to access according to your current user password. LISTREL Command The purpose of LISTREL is to provide you with information about the relations in the data base. There are three formats for the LISTREL command. The first consists of simply entering: LISTREL Using LISTREL in this fashion provides you with a list of all relations currently defined in your data base. If you wish to display the definition of a specific relation, then the syntax is: LISTREL relname The use of LISTREL in this manner also provides a count of the number of rows defined for the specified relation. LISTREL ALL This command (restricted by user password) will display the definitions of all relations in the data base, including counts of the number of defined rows in each relation. EXHIBIT Command The purpose of the EXHIBIT command is to allow you to query the RIM dictionary to obtain the names of all relations having a specific set of attributes. For example, if you want to know which relations contain the attribute attname you would enter: EXHIBIT attname Page 27 You would then obtain either a list of the relations having this attribute, or a message indicating that this attribute was not found in any relations in the data base. The EXHIBIT command also allows you to query fro a list of attributes(maximum of 10). Suppose that you wanted to know which relations contian both attname1 and attname2. The command would then be: EXHIBIT attname1 attname2 The general syntax of this command is: EXHIBIT attname1 [attname2 ... attnamen ] PRINT RULES Command This command can be used when the current user password matches the owner password of the data base definition. To obtain a complete list of all constraint rules enter: PRINT RULES 2.1.6 Computation Command COMPUTE Command The COMPUTE command is used to compute simple functional values of an attribute. A WHERE clause is optional and uses the same syntax as is used in the SELECT command. COMPUTE {COUNT} attname FROM relname [WHERE... ] MAX MIN AVE SUM There are some restrictions as to the type and word length of the attribute when using these computed functions. All of these functions exclude any -0- values when making their computations. The following table describes the attribute type and length restrictions for each function: Page 28 FUNCTION ATTRIBUTE TYPE ATTRIBUTE LENGTH COUNT any any MIN any of fixed length 1 for non-text, <= for text MAX any of fixed length 1 for non-text, <= for text AVE int, real, double 1 SUM int, real, double 1 Examples of COMPUTE command: COMPUTE AVE NUMPASS FROM FLIGHTS COMPUTE MAX WEIGHT FROM FLIGHTS WHERE NUMPASS LT 100 COMPUTE COUNT NAME FROM PEOPLE WHERE AGE GT 30 2.1.7 Data Base Modification Commands These commands are used to change the contents of the data base. a modify or owner password correlation is required in order to use these commands. CHANGE Command The CHANGE command is used to change the value of an attribute in a relation where certain conditions are met. CHANGE {attname1} TO value [IN relname] WHERE ... attname(i) attname(i,j) Value has the same form as described in Section 2.1.3. The WHERE clause is required and uses the same syntax as in the SELECT command. If the relation name is not specified, the attribute is changed in all relations where the attribute is found and the conditions are met. DELETE ROW Command The DELETE ROW command is used to delete selected rows in a relation. DELETE ROW FROM relname WHERE ... The name of the relation must be specified as well as a WHERE clause. The syntax for the WHERE clause is the same as in the SELECT command. DELETE DUPLICATES Command This command is used to remove any duplicate rows from a relation. It is particularly useful on relations which have been created by any of the relational algebra commands (JOIN, INTERSECT, SUBTRACT, or PROJECT). The syntax for this command is: DELETE DUPLICATES [attname1, attname2,...] from relname Duplicates are checked only for the specified (combination of) attribute(s). Default is to check the complete row (all attributes). Examples of CHANGE, DELETE, and DELETE DUPLICATES commands: CHANGE NUMPASS TO 320 IN AIRPLANES WHERE MODEL EQ 747SP CHANGE NAME TO ROBERT WHERE NAME EQ BOB DELETE ROW FROM AIRPLANES WHERE MODEL EQ DC10 CHANGE STABILITY TO LOW IN DIMENSIONS WHERE HEIGHT GTA WIDTH DEL DUP NUMPASS FRO AIRPLANES 2.1.8 Schema Modification Commands These commands are used to change the data base schema Page 29 definition. Except for the CHANGE OWNER command, a modify or owner password correlation is required in order to use these commands. CHANGE OWNER Command The CHANGE OWNER command is used to change the name of the data base password. Only the current owner is allowed to use this command. CHANGE OWNER TO newowner RENAME Attribute Command The RENAME attribute command is used to change the name of an attribute in the data base definition (schema). RENAME attname1 TO attname2 [IN relname] THe old name is attname1 and the new name is attname2. if the name of the relation is not specified, then the name change takes place in every relation that contains the old name. If the relname is specified and attname1 occurs more than once, the first occurence will be changed. RULES and KEY(s) defined for attname1 will automatically be redefined to apply to attname2. Examples of RENAME command: RENAME MODEL TO VERSION IN AIRPLANES RENAME NUMPASS TO CAPACITY Page 30 BUILD KEY Command This command is used to change an attribute from non-key to KEY. An index is built from existing data values by amking a pass through current rows of the specified relation. This index is then used and maintained just as if the attribute had been declared to be KEY in the original data base definition. BUILD KEY FOR attname IN relname Keys are not transferred to relations created by relational algebra commands. DELETE KEY Command This command is used to change an attribute from KEY to non-key. The index file for that attribute is deactivated and no longer maintained or used once the attribute has been changed to non-key with this command. DELETE KEY FOR attname IN relname CHANGE PASSWORD Command The read or modify passwords may be changed by using the following command: CHANGE {RPW} TO newpass FOR relname MPW RENAME RELATION Command You may change the name of a relation by using the following command: RENAME RELATION relname TO newname RULES applying to relname will automatically apply to newname. REMOVE Command The REMOVE command is used to remove a relation definition and its data from the data base. REMOVE relname Page 31 2.1.9 Relational Algebra Command These commands allow you to create new relations from existing relations. All relational algebra commands require modify permission on the constituent relations. INTERSECT Command The purpose of the INTERSECT command is to allow you to combine the rows of relations into a third relation based on common values within a set of specified attributes. The syntax of the INTERSECT command is: INTERSECT relname1 WITH relname2 FORMING relname3 + [USING attname1 [attname2 ... attnamen]] The USING clause identifies the attributes that form the resulting relation. The attributes used in the INTERSECT process are the subset of those identified by the USING clause which are present in both relations. For example, assume that you have the following two relations defined: REL-1 REL-2 NAME DEPT JOB DEPT JOB PAY ----- ----- ----- ----- ----- ---- BOB A ENGR A ENGR 800 JIM C SUPR B ENGR 450 BOB B ENGR C ENGR 750 RAY C ENGR You may INTERSECT two relations restricted to specific sets of attributes (the USING clause) or use all attributes of both relations. In either case RIM will identify the common attributes and use the common values within these attributes to identify the conditions for intersect generation. Suppose you want to INTERSECT the two relations using attributes DEPT, NAME, and JOB. The command for this would be: INTERSECT REL-1 WITH REL-2 FORMING REL-3 USING DEPT NAME JOB The result would be the new relation REL-3 shown on the next page. Page 32 REL-3 DEPT NAME JOB ---- ----- ----- A BOB ENGR B BOB ENGR C RAY ENGR In this example there are no duplicate rows in REL-3. However, it is possible that the intersect command will create duplicate rows. Since, in general, duplicate rows are not desired in a relation, they can be removed with the DELETE DUPLICATES command. Note also that by specifying which attributes the INTERSECT is using, you restrict the number of attributes in the resulting relation to only those specified in the USING clause. Suppose you want RIM to use all the attributes in the two relations. In this instance you would enter: INTERSECT REL-1 WITH REL-2 FORMING REL-4 The result would be REL-4 consisting of the attributes NAME, DEPT, JOB, and PAY, shown below in the resulting rows: REL-4 NAME DEPT JOB PAY ----- ----- ---- --- BOB A ENGR 800 BOB B ENGR 450 RAY C ENGR 750 There may be situations where an INTERSECT is impossible to perform. These include: 1) The name of the resulting relation already exists 2) The two relations have no common attributes 3) The attributes in the USING clause do not exist in the relation being intersected 4) The resulting relation exceeds 1021 words If any of the above situations is encountered, you are warned of the problem and the INTERSECT command processing is stopped. In the case where common attribute names exist but there are no matching values, the operation will be successful resulting in an empty relation (0 orws). Page 33 The INTERSECT command is a powerful tool and may be used as a step towards satisfying queries which require attributes from more than on relation. JOIN Command The JOIN command is a function operating on two relations to form a third relation. The purpose of the JOIN is to juxtapose two relations based on a specified attribute from each. The result of the JOIN command is a third relation containing all of the attributes from both relations. Rows are generated in the new relation as a result of the comparison conditions between attributes being satisfied. The syntax of the JOIN command is: JOIN relname1 USING attname1 WITH relname 2 USING + attname2 FORMING relname3 [ WHERE {EQ} ] NE GT GE LT LE The WHERE clause of the JOIN command is different form the WHERE clause of the SELECT command. In JOIN it applies only to the comparison of the two attributes upon which JOIN is based. If the WHERE clause is omitted (default), EQ is used. The value of attname1 in the first row of relname11 is compared to all the values of attname2. Rows which qualify are generated in relname3. The value of attname1 in the second row of relname1 is compared to all the values of attname2, etc. Each row from relname1 may generate 0, 1, 2, or more rows in relname3. For example, consider the relations REL1 AND REL2: REL1 REL2 A B C D E --- --- --- --- --- 1 2 3 3 1 4 5 6 6 2 7 8 9 The following JOIN command would produce the result shown. Page 34 JOIN REL1 USING B WITH REL2 USING D + FORMING REL3 WHERE LT REL3 A B C D E --- --- --- --- --- 1 2 3 3 1 1 2 3 6 2 4 5 6 6 2 The JOIN will function correctly on any comparison providing that you compare attributes of the same data type. All attribute names in the resultant relation must be unique in order for you to obtain accurate results from subsequent commands using the relation. Any duplicate attribute names should be change using the RENAME command before doing queries or updates to the new relation. In the case of duplicate attribute names, RENAME when applied to a specific relation will change the first attribute name. There may be situations where a JOIN is impossible to perform. These may include: 1) The name of the resulting relation already exists 2) The attribute in the USING clause does not exist in the relation being joined 3) The attributes being compared are different data types or lengths 4) An attribute in either of the relations greater than 300 computer words 5) The resulting relation exceeds 1021 words If any of the above situations are encountered you are warned of the problem and the JOIN command processing is stopped. PROJECT Command The function of a PROJECT command is to create a new relation as a subset of an existing relation. You may want to create the new relation from the old one by removing attributes, removing rows, or both. The syntax for the PROJECT command is: PROJECT relname1 FROM relname2 USING {attname1...attnamen} + ALL [WHERE ...] The WHERE clause is optional but it is specified, it has the same syntax as in the SELECT command. You are required to specify which attributes are to be retained in the new relation. The old relation is relname2 and the new relation is relname1. Page 35 For example consider the following relation: PEOPLE EMPNUM EMPNAME BOSS POSITION GROUP ------ ------- ------ -------- ------ 2181 JONES SMITH MANAGER AADE 3964 ERICKSON BUSS APPL-MGR ACC 6543 GRAY PARKER ASST-MGR PHOTO 2233 SCHMITZ BUSS APPL-MGR ACC To create a new relation with EMPNAME and GROUP as the only attributes and where now rows contain PARKER as BOSS enter the command: PROJECT TEMP1 FROM PEOPLE USING EMPNAME GROUP + WHERE BOSS NE PARKER TEMP1 EMPNAME GROUP ------- ------ JONES AADE ERICKSON ACC SCHMITZ ACC The PROJECT command is useful to reduce the size of a relation when only a subset of the data is needed. RIM will not eliminate any duplicate rows formed in the new relation. You must do that yourself with the DELETE DUPLICATES command. There may be situations where a PROJECT is impossible to perform. These include: 1) The name of the resulting relation already exists 2) An attribute in the USING or WHERE clause is not in the relation SUBTRACT Command The SUBTRACT command is similar to the PROJECT command in that the new relation is a subset of an existing relation. The rows, however, are selected based on the data in another relation rather than on a WHERE clause within the same relation. Where the INTERSECT command looked for rows of two relations which matched up, the SUBTRACT command does just the opposite. It looks for rows in the relation which do not match any rows in the other relation. The syntax for the SUBTRACT command is: SUBTRACT relname1 FROM relname2 FORMING relname3 + [USING attname1 [attname2 ... attnamen]] Page 36 All rows in the new realtion will come from relname2. If the USING clause is not specified, then all attributes of relname2 will be attributes of relname3. Relname1 is the relation that rows of relname2 are checked against for matches. If a USING clause is specified at least one of the attributes in the clause must be common to both relations. As an example consider these two example relations: EMPDATA BOSSDATA EMPNUM EMPNAME BOSS BOSS POSITION GROUP ------ ------- ------ ------ -------- -------- 2181 JONES SMITH SMITH MANAGER AADE 3964 ERICKSON BUSS PARKER ASST-MGR PHOTO 6543 GRAY PARKER BUSS APPL-MGR ACC The following command will produce a new relation from EMPDATA: SUBTRACT BOSSDATA FROM EMPDATA FORMING TEMP USING + EMPNAME BOSS The resulting relation TEMP would contain only one row: TEMP EMPNAME BOSS ------- ----- BROWN WHITE There may be situations where a SUBTRACT is impossible to perform. These include: 1) The name of the resulting relation already exists 2) The relations have no common attributes 3) The number of attributes in the USING clause is greater than the number in relname1 4) An attribute in the USING clause is not in the relations 2.1.10 Report Generation Commands These commands establish a limited report generation capability. Page 37 NEWPAGE Command This command causes a new page to be issued. It applies to batch output only. The command is: NEWPAGE BLANK Command Blank lines can be inserted into the output stream by using the command: BLANK n where n is the number of blank lines written. TITLE Command The command: TITLE "titlestring" causes the text "titlestring" to be printed, centered on the line. If the length of "titlestring" is longer than current lines width it will be truncated and a warning issued. DATE Command The command: DATE will cause the current date to be printed, centered on the line. LINES Command This command controls the number of lines per page (exclusive of title.) The command is: LINES n will establish page size to n lines. Default is 56. WIDTH Command This command controls the width of a printed line. The command: WIDTH n will establish a line width of n characters. Default is 78 if output is to a terminal, 132 if output is to a batch printer. If n is specified to be less than 20, 20 will be used. Page 38 2.1.11 Communication Command UNLOAD Command The UNLOAD command permits you to off-load a portion or all of your data base onto a previously designated file (see OUTPUT command). The file will contain 80 characters text records and can be read by RIM as an input file on the same or on a different computer using the INPUT command. Default file name is for006. The syntax of this command is: UNLOAD [dbname = newname] {ALL } + SCHEMA DATA [relname1 [ mpw1 ] relname2 [ mpw2 ] ... ] Specifying SCHEMA will off-load the schema of your data base, DATA will off-load the data of your data base and ALL will off-load both schema and data. Optionally, you may rename your data base by entering dbname =newname where dbname is the name of the currently open data base. By specifying relation names, you will only off-load data and/or schemas for the specific relations. The modify password does not allow you to modify access to the relation. There are implicit password restrictions to the unload command as follows: If you are the data base owner, you may off-load any data and/or schema. If you are not the owner, you may off-load data and/or schema for the relations for which you have modify access permission. Your password becomes the owner of the off-loaded data base. Rules, if any, will only be off-loaded if you are the owner of the data base and you have used the option ALL. Page 39 2.2 MENU MODE EXECUTION OVERVIEW The RIM menu mode provides you with the capability to build the schema for a new data base and to update an existing data base definition. The options (create, update, query, command, and exit) available in menu mode are shown in figure 2.2-1. Executions may be terminated at anytime by entering the word QUIT. EXIT, in response to an input prompt, will return you to the top menu. The data base will be purged following a QUIT command. Page 40 l----------------l l BEGIN RIM 5.0 l l----------------l l l RIM COMMAND MODE ENTER "MENU" FOR MENU MODE R>MENU l l l SELECT THE EXECUTION OPTION DESIRED 1) CREATE A NEW DATABASE 2) UPDATE AN EXISTING DATABASE 3) QUERY AN EXISTING DATABASE 4) ENTER COMMAND MODE 5) EXIT l l------------------------------------------------l l l l l l l l l l l CREATE OPTION l QUERY OPTION l EXIT SECTION 2.2.1 l SECTION 2.2.3 l SECTION 2.1.1 l l UPDATE OPTION COMMAND MODE SECTION 2.2.2 SECTION 2.1 Figure 2.2-1 Section References for the Menu Mode Options Page 41 2.2.1 Data Base Creation Option The purpose of this option is to construct a schema by prompting you for the data base, owner, the names of the relations, their associated attributes and read/modify passwords. After compilation of the schema, you have the opportunity to interactively load the data base and/or query the data base. In the command mode, you have available the full set of RIM commands (section 2.1) allowing the direct definition of the schema using the DEFINE submodule commands and the loading of the data base using the LOAD submodule commands. 2.2.2 Data Base Update Option With this option you may add/modify relations and/or load additional data into the data base. If additional relations are desired, you are prompted for the names of the relations, their associated attributes and read/modify passwords. If additional data is to be loaded, the list of relations in the data base is displayed and your enter the required data. Removal or modification of data in the data base is done using the RIM data base modification commands. In this command mode, you have available the full set of RIM commands (section 2.1) allowing the direct addition of relations using the DEFINE submodule commands and the loading of data using the LOAD submodule commands. The data base modification commands are used to update existing data. 2.2.3 Query Option With this option you are prompted for the data base name. The full set of RIM commands (section 2.1) is available to you for data base query. In addition to query, all other data base activities are available through the RIM command mode. Page 42 2.3 RIM MENU MODE INTERACTIVE DIALOGUE This section presents the questions and menus that appear in the menu mode. The response options are also discussed. The menu mode is accessed by entering MENU anytime in the command mode when a R> prompt is present. 2.3.1 General Option and Questions SELECT THE EXECUTION OPTIION DESIRED 1) CREATE A NEW DATA BASE 2) UPDATE AN EXISTING DATA BASE 3) QUERY AN EXISTING DATA BASE 4) ENTER COMMAND MODE 5) EXIT SELECT THE UPDATE OPTION DESIRED 1) DEFINE ADDITIONAL RELATIONS 2) LOAD ADDITIONAL DATA The desired update option is selected by entering either the integer 1, allowing the definition of additional relations, or 2, allowing the loading of additional data into the data base. DO YOU WANT TO QUERY THE DATA BASE AT THIS TIME--Y OR N You may switch to the command mode for query by entering "Y". If the query option is not desired "N". 2.3.2 Data Base Files ENTER THE NAME OF THE DATA BASE The 1-6 character alphanumeric name assigned to the data base is entered here. The name is used to create the names of the logical files that contain the data base. Page 43 2.3.3 Schema Definitions ENTER THE NAME OF THE DATA BASE The 1-6 character alphanumeric name assigned to the data base is entered here. All future references to this data will be via the assigned data base name. ENTER THE NAME OF THE DATA BASE OWNER The 1-8 character alphanumeric name of the data base owner is entered here. This name is used as the schema password. Additional schema definitions will not be permitted unless the user password matches the owner password assigned here. ENTER THE NAME ASSIGNED TO THIS RELATION A 1-8 character alphanumeric name assigned to the relation being defined. ENTER THE READ PASSWORD FOR THIS RELATION A 1-8 character alphanumeric string assigned by the owner as the read password for the relation being defined. if the owner has assigned a read password the user password must match in order to query the relation. If no read password is desired enter NONE. ENTER THE MODIFY PASSWORD FOR THIS RELATION A 1-8 character alphanumeric string by the owner as the modify password for the relation being defined. if the owner has assigned a modify password the user password must match in order to load or modify the relation. if no read password is desired enter NONE. ENTER THE ATTRIBUTES OF THIS RELATION ENTER END WHEN COMPLETE attname type length (IF >) "KEY" (IF KEY) Attname = 1-8 character alphanumeric string identifying the attribute being defined. Page 44 Type = INT (Integer) REAL (Real) TEXT (Text) DOUB (Double Precision) RVEC (Real Vector) IVEC (Integer Vector) DVEC (Double Precision Vector) RMAT (Real Matrix) IMAT (Integer Matrix) DMAT (Double Precision Matrix) Length = number of characters (text) or number of values (all others) 1,2,3 ..., etc., or VAR INT TEXT REAL DOUB RVEC IVEC DVEC row, column or RMAT row, VAR or IMAT VAR, VAR DMAT A variable length (or length greater than one) INT, REAL, or DOUB can be considered to be functionally identical to IVEC, RVEC, or DVEC. KEY = the word key indicates the attribute is key. Example: To define a text string attribute (TEXTST) of 60 characters, a real attribute (TEXTST) of 60 characters, a real attribute (REAL1), an integer key attribute (INT-1), and a real matrix with dimensions 6x8 (MAT68), the following entries would be made: R> TEXTST TEXT 60 R> REAL1 REAL R> INT-1 INT KEY R> MAT68 RMAT 6,8 To end the definition of the attributes for this relation, the word "END" is entered. DO YOU HAVE ADDITIONAL RELATIONS TO DEFINE--Y OR N Additional relations may be defined by entering the character "Y". If no additional relations are to be defined at this time, enter "N". Page 45 2.3.4 Data Base Loading DO YOU WANT TO LOAD THE DATA BASE--Y OR N The data base is available for data loading if desired. Enter "Y" if you want to load the data base at this time. Enter "N" if no data is to be loaded. SELECT THE RELATION TO BE LOADED The relations defined in the data base will be listed. You select the relation to be loaded by entering the integer corresponding to the desired relation. ENTER THE MODIFY PASSWORD FOR THIS RELATION No data loading will be allowed for the selected relation unless the proper modify password is entered here. ENTER THE ATTRIBUTE VALUES IN THE SPECIFIED SEQUENCE ENTER END WHEN COMPLETE Entering data values at this point loads the data base. The values are entered in the order indicated and the value entered must correspond to the attribute type. If a text string contains embedded blanks, or commas, or if entirely numeric text is entered, it must be enclosed in quotation marks . Unused trailing characters in fixed length text strings will be blank filled. It is recommended that leading blanks not be used in text strings. If vectors or matrices are loaded, all values must be specified. Enter "END" when data loading is complete. It is recommended that large data bases and data bases that have vectors and matrices use the application program interface for loading data. DO YOU HAVE ADDITIONAL RELATIONS TO LOAD--Y OR N If you want to load another relation, enter "Y". If all the data base to be loaded at this time has been loaded, enter "N". Page 46 3.0 RIM EXECUTION THROUGH THE APPLICATION PROGRAM INTERFACE Any programming language which can call FORTRAN subroutines can access and modify a pre-defined RIM data base through FORTRAN-callable subroutines contained in the RIM application program interface library(RIMLIB). Data is accessed one row at a time. The RIM data access subroutines store data in and retrieve data from an array you provide in your program logic. In either case the array used must be large enough to hold one complete row for each relation accessed. Attributes which contain text data must be given particular care. In general, Hollerith format (left adjusted, blank filled) is used. Some textual parameters like those for data base, relation and attribute names must allow for eight characters (8H), others like key words such as INT, REAL etc. must allow room for four characters (4H). Values of textual attributes or text strings used in conditional expressions are passed in an array packed together with other kinds of information. Such text strings are left adjusted with unspecified fill. The number of words such text strings occupy depends upon the length of the text string. there are special instructions in appropriate sections on how to pass such attributes. The application program interface requires you to manage the data base files. The data base files must exist on three properly named logical files before your program can be executed. Password checks operate in the application program interface in much the same way as in the standalone system. No password permission is requird for RMOPEN, RMUSER, RMRULE, or RMTOL. Read permission is required for all other calls except RMLOAD and RMPUT for which modify permission is required. Modify permission implies read permission. 3.1 INITIALIZING THE DATA BASE CALL RMOPEN (abname) --------------------- Input parameter: Dbname-- the name of the data base in Hollerith format This routine initializes the internal tables used by RIM and opens the specified data base by reading the data base control information into the incore working areas. Page 47 CALL RMCLOS ----------- This routine closes the current data base and copies the incore working areas to the logical data base files. This routine is required (if you have modified the data base) before your program can access another data base. 3.2 STATUS OF DATA BASE ACTIVITY When an operation on the data base has been attempted, the status of the operation is returned to the application program via the RMSTAT variable in the RIMCOM common block. This common block must be declared in the calling program as follows: COMMON /RIMCOM/ RMSTAT INTEGER RMSTAT The value of RMSTAT should be checked after each operation. A non-zero value indicates the operation was not successful. as a result, subsequent operations may not function as expected. The RMSTAT values and meanings are as follows: -1 NO MORE DATA AVAILABLE FOR RETRIEVAL 0 OK - OPERATION SUCCESSFUL 10 DATA BASE FILES DO NOT CONTAIN A RIM DATA BASE 11 DATA BASE NAME DOES NOT MATCH FILE CONTENTS 12 INCOMPATIBLE DATA BASE FILES (DATE,TIME,ETC) 13 DATA BASE IS ATTACHED IN READ ONLY MODE 14 DATA BASE IS BEING UPDATED 15 DATA BASE FILES ARE NOT LOCAL FILES 16 DATA BASE HAS BEEN OPENED 20 UNDEFINED RELATION 30 UNDEFINED ATTRIBUTE 40 MORE THAN 10 AND/OR OPERATORS IN THE WHERE CLAUSE 41 ILLEGAL "LIMIT EQ N" CONDITION 42 UNRECOGNIZED COMPARISON OPERATOR 43 EQS ONLY AVAILABLE FOR TEXT ATTRIBUTES 44 ILLEGAL USE OF MIN/MAX IN THE WHERE CLAUSE 45 UNRECOGNIZED AN/OR OPERATOR 46 COMPARED ATTRIBUTES MUST BE THE SAME TYPE/LENGTH 47 LISTS ARE VALID ONLY FOR EQ AND NE 50 RMFIND NOT CALLED 60 RMGET NOT CALLED 70 RELATION REFERENCE NUMBER OUT OF RANGE 80 VARIABLE LENGTH ATTRIBUTES MAY NOT BE SORTED 81 THE NUMBER OF SORTED ATTRIBUTES IS TOO LARGE 89 SORT SYSTEM ERROR 90 UNAUTHORIZED RELATION ACCESS 100 ILLEGAL VARIABLE LENGTH ROW DEFINITION (LOAD/PUT) 110 UNRECOGNIZED RULE RELATIONS 111 MORE THAN 10 RULES PER RELATION Page 48 THE FOLLOWING CODES SHOULD NOT BE ENCOUNTERED IN NORMAL USE 1001 BUFFER SIZE PROBLEM - BLKCHG,BLKDEF 1002 UNDEFINED BLOCK - BLKLOC 1003 CANNOT FIND A LARGER B-TREE VALUE - BTADD,PUTDAT 1004 CANNOT FIND B-TREE BLOCK - BTPUT 21XX RANDOM FILE ERROR XX ON FILE1 22XX RANDOM FILE ERROR XX ON FILE2 23XX RANDOM FILE ERROR XX ON FILE3 24XX RANDOM FILE ERROR XX ON FILE4 3.3 GENERAL ROUTINES The following routines are used to set the internal switches for rule checking, to specify the data base passwords, and to set the tolerance for real numbers. These routines may be called any number of times with the new value overwriting the current value. CALL RMUSER (password) --------------------- Input Parameters: password--the password in Hollerith (8H). This routine is used to provide the password necessary for checking data base access, relation read permission and relation modify premission. CALL RMRULE (switch) ------------------- Input Parameters: switch--- 0 no rule checking (NOCHECK RULES) (int) 1 check rules (CHECK RULES) This routine turns rule checking on and off (default--on if rules are defined). CALL RMTOL (val,percent) ------------------------ Input Parameters: val------the value of the tolerance (real) percent--0 if "val" is the absolute tolerance value (int) 1 if "val" is the tolerance percent This routine sets the tolerance for floating point numbers, (default: 0.). Page 49 3.4 ACCESSING THE SCHEMA The following routines are used to obtain information about the data base schema. CALL RMLREL ----------- This routine sets an implicit pointer (used by the routine RMGREL) to the first relation in the data base. it must be called before data about any relations may be obtained. If there are no relations defined for which the current user password has read permission, RMSTAT will return 90, otherwise 0. CALL RMGREL (rname,row,mpw,lastmod,numatt,numrows) Output Parameters: rname---relation name (8H) rpw-----read password (.TRUE. or .FALSE.) mpw-----modify password (.TRUE. or .FALSE.) lastmod-date of last modification of relation data (8H) numatt--number of attributes in the relation (int) numrows-number of rows of data in the relation (int) This routine returns the data about the current relation (the relation indicated by the current pointers) and the increments the implied pointer to point to the next relation for which read permission is available. A successful execution of this routine sets RMSTAT equal to 0. I f you change passwords between calls to RMLREL and RMGREL or between successive calls to RMGREL, unpredictable results may occur. When the last relation is accessed RMSTAT will be set to -1. The following example shows how to use RMLREL and RMGREL to obtain the data about all relations in the data base. . . . COMMON /RIMCOM/ RMSTAT INTEGER RMSTAT . . . CALL RMOPEN (dbname) CALL RMUSER (password) . . . CALL RMLREL IF (RMSTAT.EQ.0) GO TO 100 . . Page 50 . print message that no relations are available using the current password . . . GO TO 200 100 CONTINUE CALL RMGREL(rname,rpw,mpw,lastmod,numatt,numrows) . . . printout the data about the relation, etc.......... . . . GO TO 100 200 CONTINUE . . . CALL RMLATT (rname) ------------------ Input Parameters: rname --- relation name (8H) This routine sets an implied pointer to the first attribute of the specified relation. if the relation exists and the current password allows access to relational data, RMSTAT will return 0. CALL RMGATT(aname,type,matvec,var,len1,len2,column,key) ------------------------------------------------------- Output Parameters: aname---attribute name (8H) type----attribute type (INT,REAL,DOUB,TEXT) (4H) matvec--attribute type (VEC or MAT -otherwise blank)(4H) var-----variable length attribute (.TRUE. or .FALSE.) len1----attribute length data as follows (int): TEXT-number of characters INT,REAL,DOUB,VEC-number of items MAT-row dimension len2----column location in the relation (int) (otherwise 0) (int) column--attribute column location in the relation (int) key-----keyed attribute (.TRUE. or .FALSE.) Page 51 This routine returns the data about the current attribute (the attribute indicated by the implied pointer) and increments the implied pointer to point to the next attribute. When the last attribute is accessed, RMSTAT will return -1. The following example shows the use of RMLREL,RMGREL,RMLATT, and RMGATT to obtain the data about all attributes for all realtions. (the equivalent of LISTREL ALL) . . . COMMON /RIMCOM/ RMSTAT INTEGER RMSTAT . . . CALL RMOPEN(dbname) CALL RMUSER(password) . . . CALL RMLREL 100 CONTINUE CALL RMGREL(rname,rpw,mpw,lastmod,numatt,numrows) IF (RMSTAT.NE.0) GO TO 300 CALL RMLATT(rname) DO 200 K=1,numatt CALL RMGATT(aname,type,matvec,var,len1,len2,column,key) IF(RMSTAT.NE.0) GO TO 300 . . . printout the relation and attribute data, etc.......... . . . 200 CONTINUE GO TO 300 300 CONTINUE . . . Page 52 3.5 ACCESSING THE DATA BASE The routines which access the data base allow the following operations: 1) GET an existing row of data from aspecified relation and store it in a local array (must be preceded by a RMFIND). 2) LOAD a new row of data from a local array to the bottom of a specified relation (must be preceded by a RMFIND). 3) PUT an existing row of data back into a specified relation after it has been modified (must be preceded by a RMFIND, RMGET). 4) DELETE an existing row of data from a specified relation (must be preceded by a RMFIND, RMGET). Each of the above operations works on one row of data at a time. RMGET increments the pointers to point to the next row. The initial pointers must be established before the required operation can be performed (RMFIND). The rows returned may be qualified with a WHERE clause (default - all rows) and the rows may also be returned in a sorted order (RMGET only). To support concurrent access to multiple relation, a parameter is provided to allow the assigning of a number to identify the set of pointers for a given relation. In this way the operations on the data base are related to a number which in turn corresponds to the pointers for a single relation. CALL RMFIND (number,relname) ---------------------------- Input Parameters: number---number (0-5) assigns a pointer for the relation (int) relname--relation name (8H) This routine establishes the initial pointer number for a relation. A call to RMFIND must be made before calls to RMGET, RMWHER, RMLOAD, and RMSORT. Page 53 CALL RMWHER (number,attname,operator,value,numval,nextboo,numboo) ---------------------------------------------------------------- Input Parameters: number--number (0-5) identifies the relation pointer for this operation (int) attname-array of attribute names (may also be attribute number, ROWS or LIMIT) where the nth attname corresponds to the nth WHERE clause (Hollerith) operator-array of operators (EQ,GT,EQA,EXIS,FAIL,etc.) where the nth operator corresponds to the nth WHERE clause (each 4H) value---2-dimensional array of (any type, fixed, or variable) where the nth row corresponds to the nth WHERE clause The organization of the array is dependent on the of the array is dependent on the attribute type and length. Let vset represent a list of values (in most cases the list has one in vset (see the SELECT command). The rows are organized as follows: Fixed length attributes-------------------------- vset(1),vset(2),......,vset(numval) where numval is equal to the number o f values in the list (note if the EQA condition is used there can only be one member in the vset, see the SELECT command) Variable length attributes------------------------ TEXT - c(1),0,vset(1),c(2),0,vset(2)............, c(numval),0,vset(numval) where c is the number of characters in the corresponding vset and numval is equal to the number of values in the list. INT,REAL,DOUB,VEC - items(1),0,vset(1),items(2),0, vset(2)....,items(numval),0,vset(numval) where items is the number of items in the corresponding vset and numval is equal to the number of values in the list MAT-rows(1),col(1),vset(1),rows(2),col(2),vset(2), ......,rows(numval),col(numval),vset(numval) where rows is the number of rows and cols is the number of columns in the matrix Page 54 numval-number of values in the list of values (vset) where the nth numval corresponds to the nth WHERE clause (int array) nextboo-array of "AND" "OR" operators (each 4H) numboo-number of WHERE conditions (int). This routine qualifies a set of rows for retrieval (this corresponds to the where clause). For example, if the following WHERE clause were required: WHERE ATT1 EQ 4 7 12 OR ATT2 EQS "TEXT STRING" AND ATT3 + GT 5. AND ATT3 EQA ATT4 (ATT1 -- integer length 1) (ATT2 -- text variable length) (ATT3 -- real length 1) (ATT4 -- real length 1) The arrays would contain: attname(1) = 8HATT1 attname(2) = 8HATT2 attname(3) = 8HATT3 attname(4) = 8HATT3 operator(1) = 4HEQ operator(2) = 4HEQS operator(3) = 4HGT operator(4) = 4HEQA value(1,1) = 4 value(1,2) = 7 value(1,3) = 12 value(1,4) = value(1,5) = 0 value(2,1) = 11 value(2,2) = 0 value(2,3) = 4HTEXT value(2,4) = 4 H STR value(3,1) = 5. value(3,2) = value(3,3) = value(3,4) = value(3,5)=0 value(4,1) = 4HATT4 value(4,2) = value(4,3) = value(4,4) = value(4,5)=0 numval(1) = 3 numval(2) = 1 numval(3) = 1 numval(4) = 1 nextboo(1) = 4HOR nextboo(2) = 4HAND nextboo(3) = 4HAND nextboo(4) = 0 numboo = 4 "Value" would be dimensioned (4,5) in the above example. Page 55 CALL RMSORT (number,attname,numsort,sortype) Input Parameters: number --- number (0-5) identifies the pointer for the relation sorted (int) attname -- array of "numsort" attribute names to sort on (each 8H) numsort -- number of attributes to sort (int) sortype -- sort control numbers, corresponding to attname LT 0 causes descending sort, GE 0 causes ascending sort (int array) This routine sorts the data prior to retrieval (this is equivalent to the SORTED BY clause). For example, if the following SORTED BY clause were required: SORTED BY ATT1=A ATT2=A ATT3=D The array would contain: attname(1) = 8HATT1 attname(2) = 8HATT2 attname(3) = 8HATT3 sortype(1) = 1 sortype(2) = 1 sortype(3) = -1 numsort = 3 CALL RMGET (number,array) ------------------------ Input Parameters: Number --- number (0-5) identifies the relation pointer for this operation (int). Output Parameters: Array --- array to receive the row of data (any type). Let "coli" be the column number in the relation for the ith attribute (see RMGATT). Fixed length attributes-------------------- Array (coli) contains the start of the value for the i-th attribute. Variable length attributes---------------- Array (coli) contains the pointer "N" which points to the start of the attribute data in array. Array(N) contains one of the following: TEXT - number of characters INT,REAL,DOUB,VEC - number of items MAT(N+2) ,.....contains attribute values This routine gets a row of data from the specified relation and advances the pointer to the next qualifying row (as determined by RMWHER and RMSORT conditions). Page 56 The following figure illustrates the organization of fixed and vari- able length data in the array. The pointer word, array(p) contains values as shown. Word p+1 contains 0 or the column dimension for matrix attribute type. Figure 3.5-1 -- Organization of Array Fixed Variable Fixed Variable Length Variable Length=1 Length Length=2 Attribute Length Attribute Attribute Attribute Parameters Attribute /------^--------\ +--+---------+---------+---------+---------+-+---------+---------+--------- +-+ | | | | | |X| | | | | > | 3 | 4 | 5 | 6 |X| N | N+1 | N+2 | > < | | | | |X| | | | < | | | | | |X| | | | | +--+---------+---------+---------+---------+-+---------+---------+--------- +-+ VALUE POINTER \-------v--------/ /---^---\ VALUE VALUE * NO. Chars 0 +---+ (text) | N | * NO. Words 0 +-+-+ (Int, Real) | * NO. Items 0 | (DOUB, DVEC) | * NO. Items 0 | (Ivec, RVEC) | * Row Dimens. Col. Dimens. | (Matrix) (Matrix) | \--v--/ | ^ | | +-------------------------------+ Page 57 CALL RMLOAD (number,array) ------------------------- Input Parameters: number --- number (0-5) identifies the relation to load (int). array ---- array containing the row of data to load (any type). (see RMGET for a description of array) This sequence of calls will modify a row of data in a specified relation. CALL RMGET (number,array) ------------------------ . . . CALL RMDEL (number) ------------------- Input Parameters: number --- number (0-5) identifies the relation from which rows are to be deleted (int). This sequence of calls will delete a row of data in a specified relation. Calls to RMPUT and RMDEL must be preceded by calls to RMGET since neither RMPUT or RMDEL advances the pointer they operate on to the next row. Page 58 RIM Handy Reference Card DEFINING A DATABASE SCHEMA DEFINE dbname OWNER password ATTRIBUTES attname {REAL} [{length}][KEY] INT VAR TEXT DOUB RVEC IVEC DVEC attname {RMAT} {row,col} [KEY] IMAT row,VAR DMAT VAR,VAR RELATIONS relname WITH attname1 [attname2...] PASSWORDS {READ PASSWORD} FOR {relname} IS password RPW ALL {MODIFY PASSWORD} FOR {relname} IS password MPW ALL RULES attname [IN relname] {EQ} value [{AND}...] NE OR GT GE LT LE attname IN relname {EQA} attname IN relname [{AND}...] NEA OR GTA GEA LTA LEA END LOADING A RELATION LOAD relname value1 value2 ... valueN END value: SCALARS val1 TEXT "text string" VECTOR (val1, val2, ...) MATRIX(r1c1,r2c1,...),(r1c2,r2c2,...)...) QUERYING A RELATION SELECT {attname1 [=fid1],attname2[=fid2],...} FROM relname + attnum1 [=fid1],... attname1(i),... Page 59 attname1(i,j)... ALL [SORTED BY attname1 [={A}],[attname2 [={A}]...]]+ D D [WHERE ...] TALLY attname [={A}] FROM relname [WHERE...] D WHERE CLAUSE: WHERE attname {EXISTS} [{AND}...] FAILS OR EQS value EQ {value} NE MAX GT MIN LT LE GE WHERE attname {EQA} attname [{AND}...] NEA OR GTA GEA LTA LEA WHERE ROWS {EQ} rownumber [{AND}...] NE OR LT LE GE GT WHERE {attname} {EQ} list [{AND}...] ROWS NE OR WHERE LIMIT EQ number [{AND}...] OR ... QUERYING THE SCHEMA LISTREL [relname] ALL EXHIBIT attname1 [attname2...] PRINT RULES COMPUTATION COMMAND COMPUTE {COUNT} attname FROM relname [WHERE...] Page 60 MIN MAX AVE SUM MODIFICATION COMMANDS CHANGE {attname} TO value [IN relname] WHERE ... attname(i) attname(i,j) CHANGE {RPW} TO newpass FOR relname MPW CHANGE OWNER TO newowner DELETE ROWS FROM relname WHERE ... DELETE DUPLICATES [attname1,attname2,...] FROM relname DELETE RULE rulenumber RENAME ATTRIBUTE attname TO newname [IN relname] RENAME RELATION relname TO newname REMOVE relname RELATIONAL ALGEBRA COMMANDS INTERSECT relname1 WITH relname2 FORMING relname3 + [USING attname1 [attname2,...]] JOIN relname1 Using attname1 WITH relname2 USING attname2 + FORMING relname3 [WHERE {EQ}] NE GT GE LT LE SUBTRACT relname1 FROM relname2 FORMING relname3 + [USING attname1 [attname2,...]] PROJECT relname1 FROM relname2 USING + {attname1,[attname2,...]} [WHERE ...] ALL REPORT COMMANDS NEWPAGE BLANK n TITLE "title" DATE LINES n WIDTH n KEY COMMANDS BUILD KEY FOR attname IN relname DELETE KEY FOR attname IN relname Page 61 RIM-TO-RIM COMMAND UNLOAD [dbname [=newdbname]] {SCHEMA} [relname1 [=mpw] + DATA ALL [relname2 [=mpw],...] GENERAL COMMANDS INPUT {filename} TERMINAL OUTPUT {filename} TERMINAL EXIT QUIT MENU HELP [command name] USER password ECHO NOECHO CHECK NOCHECK TOLERANCE xx.xx [PERCENT] RELOAD CLOSE HOST DEPENDENT COMMANDS (note: may be CDC syntax) OPEN dbname [=filename],[UN=account],[PW=password],+ [DIRECT={R}] W ZIP "jet statement" Page 62 Summary of the Application Program Interface INITIALIZING THE DATA BASE CALL RMOPEN (dbname) Input parameter: dbname -- the name of the data base in Hollerith format CALL RMCLOS GENERAL ROUTINES CALL RMUSER (password) Input parameters: password -- the password text CALL RMRULE (switch) Input parameters: switch -- 0 - no rule checking (Nocheck) 1 - check rules (CHECK) CALL RMTOL (value,switch) Input parameters: value -- the value of the tolerance (real) switch - 0 if "val" is tolerance value (int) 1 if "val" is tolerance percent ACCESSING THE SCHEMA CALL RMLREL CALL RMGREL(rname,rpw,mpw,lastmod,numatt,numrows) Output parameters: rname - relation name (text) rpw read password, .TRUE. or .FALSE. mpw modify password, .TRUE. or .FALSE. lastmod date of last modification in relation data in yy/mm/dd format numatt number of attributes in relation (int) numrows number rows of data in relation (int) CALL RMLATT(rname) Input parameters: rname - relation name in hollerith (text) format CALL RMGATT(aname,type,matvec,var,len1,len2,column,key) Output parameters: aname - attribute name type - attribute type (INT, REAL, DOUB, or TEXT) matvec- attribute type (VEC or MAT, else blank) var variable length attribute, .TRUE. or .FALSE. len1 - attribute length data as follows (int): TEXT - number of characters INT, REAL, DOUB, VEC - number of items MAT - row dimension len2 - Column dimension of MAT attributes, otherwise 0 (int) column- attribute column location in relation (int) key - keyed attribute (.TRUE. or .FALSE.) ACCESSING THE DATA BASE CALL RMFIND(number,relname) Input parameters: Page 63 number - user assigned number (0-5) used to reference the pointer for the relation (int) relname- relation name (characters, H format) CALL RMWHER(number,attname,operator,value,numval,nextboo,numboo) Input parameters: number - number (0-5) which identifies the relation pointer for this operation (int) attname - array of attribute names, attribute numbers, the keyword ROWS, or LIMIT operator - array of operators (EQ, GT, EQS, EQA, etc.) value - 2 dimensional array of WHERE clause "values" numval - Number of "values" in list of values nextboo - array of "AND" "OR" operators numboo - Number of WHERE conditions (int) CALL RMSORT(number,attname,numsort,sortype) Input parameters: number - number (0-5) which identifies the relation pointer for this operation (int) attname - array of "numsort" attribute names to sort on numsort - number of attributes to sort on (int) sortype - sort control numbers: -1 = descending sort, +1 = ascending sort. CALL RMGET(number,array) Input parameters: number - number (0-5) which identifies the relation pointer for this operation (int) OUTPUT Parameters: array - array to receive the row of data CALL RMLOAD(number,array) Input parameters: number - number (0-5) which identifies the relation pointer for this operation (int) array- array containing the row of data to load CALL RMPUT(number,array) Input parameters: number - number (0-5) which identifies the relation pointer for this operation (int) array - array containing the modified row of data. CALL RMDEL (number) Input parameters: number - number (0-5) which identifies the relation pointer to be deleted. (int) Page 64 The following is a small sample program in VAX Fortran to show how RIM may access the AERODB data base. It prints the following: 1. All information about the schema (LISTREL ALL) 2. The data in the relation REL300 sorted for the airports in Brazil sorted by descending altitude. CITYNAME is variable length and the commands are SELECT ALL FROM REL300 SORTED BY ALTITUDE=D WHERE CITYNAME EQS "BRAZIL". LOGICAL RPW,MPW,VAR,KEY COMMON/RIMCOM/RMSTAT INTEGER RMSTAT REAL*8 NAME,LASTMD,NAMEA,NAMEC,IVAR,DB,NAME DIMENSION NVAL(20) DIMENSION NAMEQS(5) C OPEN THE DATA BASE DBNAME=6HAERODB CALL RMOPEN(DBNAME) C LISTREL ALL CALL RMLREL 100 CONTINUE CALL RMGREL(NAME,RPW,MPW,LASTMD,NUMATT,NUMROW) IF(RMSTAT.NE.0)GOTO 200 LRP=3HNO IF(RPW) LRP=3HYES MRP=3HNO IF(MPW)MRP=3HYES WRITE(6,110)NAME,LRP,MRP,LASTMD,NUMATT,NUMROW 110 FORMAT(1X,A8,2(1X,A4),1X,A8,2I8) CALL RMLATT(NAME) 120 CONTINUE CALL RMGATT(NAMEA,ITYPE,MAT,VAR,LEN1,LEN2,NCOL,KEY) IF(RMSTAT.NE.0)GOTO 100 IVAR=5HFIXED IF(VAR)IVAR=8HVARIABLE IKEY=2HNO IF(KEY)IKEY=3HYES WRITE(6,130)NAMEA,ITYPE,MAT,IVAR,LEN1,LEN2,NCOL,IKEY) 130 FORMAT(1X,A8,2(1X,A5),1X,A8,3I8,1X,A3) GOTO 120 200 CONTINUE C SELECT ALL FROM REL300 SORTED BY ALTITUDE=D+ C WHERE CITYNAME EQS "BRAZIL" NAME=6HREL300 CALL RMFIND(1,NAME) IF(RMSTAT.NE.0)GOTO 999 NAMEQS(1)=6 NAMEQS(2)=0 NAMEQS(3)=4HBRAZ NAMEQS(4)=2HIL Page 65 NAMEC=8HCITYNAME IBOOOP=3HEQS CALL RMWHER(1,NAMEC,IBOOOP,NAMEQS,1,0,1) IF(RMSTAT.NE.0)GOTO 500 NAMEA=8HALTITUDE CALL RMSORT(1,NAMEA,1,-1) IF(RMSTAT.NE.0)GOTO 999 300 CONTINUE CALL RMGET(1,NVAL) IF(RMSTAT.NE.0)GOTO 500 NUMX=(NVAL(5)-1)/10+1 NUMP=6+NUMX WRITE(6,400)(NVAL(K),K=1,NUMP) 400 FORMAT(A4,5I6,2X,30A1) GOTO 300 500 CONTINUE IF(RMSTAT.LT.0)GOTO 1000 999 CONTINUE WRITE(6,9001)RMSTAT 9001 FORMAT(' RMSTAT:',I5) C CLOSE THE DATA BASE 1000 CONTINUE CALL RMCLOS STOP END Page 66 LIMITATIONS There is no limit on the number of rows of a relation except disk size. A row in a relation must fit in 1021 words. If len(i) is the fixed length (in words) of the ith attribute and var(j) is the length (in words) of the jth variable length attribute, then SUM(len(i) for i=1 to max)+sum((var(j)+3) for j=1 to max) must be less than 1021. This can mean that relations that fit on 60 bit machines may not fit on 32 bit machines. A relation or attribute name must not begin with the character string "RMRUL". The following words may not be used in attribute or relation names: TO, FROM, BY, USING, WHERE, IN, FORMING, ROWS, LIMIT, DUPLICATE. Also, names must not be a substring of the above which is 3 characters or more long starting with the first character. Thus FOR and FORM are illegal, however FORT is OK. In loading data, the value of the first attribute, if it is text, is limited as follows: If the relation contains only 1 or 2 attributes, then the following text strings and their RIM substrings are not allowed as values for the first attribute: CHECK, NOCHECK, ECHO, NOECHO, END, HELP, INPUT, OUTPUT, QUIT. If the relation contains three attributes then the value for the first attribute may not be HELP or HEL. The number of items in one command may not exceed 100. The number of rules specified for one relation may not exceed 10. The number of conditions used in the SELECT WHERE clause may not exceed 10. Page 67 Entering Input with the RIM User Interface The following discusses the reading and parsing of commands and data in the standalone system. The RIM user interface is a free-field input routine used by the RIM standalone system which separates user input into items which are grouped into records. Terminology 1. LINE - One line of information with a max- imum of 80 characters including blanks. 2. ITEM - One piece of information. An item may be a real number, an integer or text. Items are delimited by blanks or commas. Multiple blanks count as a single blank. Multiple commas generate null items. 3. RECORD - A collection or list of up to 100 items entered in response to a single request for data by the calling program. 4. INTEGER - all characters must be numeric except that the first may be a + or - sign. For example: -1 23 +10000 5. REAL - An item of the form I1.I2EI3 where I1 and I3 may be signed integers and I2 is an unsigned in- teger. The entire form is not necessary but at least one digit and the . or two digits separated by the E are required. 6. TEXT - Any single item that is not integer or real. If a text item looks like an integer or real it must be enclosed in quotes ("). Composing Records Ordinarily records consist of one line. However multiple records may be put on a line by separating them with dollars or semicolons. Alternatively, Page 68 a record may span several lines by ending all but the last line with a plus. Items must be wholly contained on one line with the exception of quoted text items and comments. Special Items - +,(, ) Equals and left and right parentheses are treated as single items unless enclosed in quoted text items. Thus a=3. is 3 items, two text and one real rather than one. "a=3." is one item. Multiple Commas If more than one comma separates 2 items, each additional comma will generate a text item with 3 characters, "-0-". Rules for Text Items A quoted text item is terminated by a record separator (dollar or semicolon). Quoted text items may be continued on multiple lines. If the trailing quote is omitted on the last item in a record, the quoted item is terminated at the record separator, if any, or the last nonblank character on the line. Quotes may be included in quoted text strings by doubling the quotes (e.g., "a,""b" yields a,"b as a text string). The total number of characters for all text strings in a record is limited to 2000. Comments Comments may be included anywhere in the input stream by enclosing them between *( and ). For example *( this is a comment). Comments are completely ignored by the user interface. Empty lines between records are ignored and may be used to paragraph input. An alternative form of comment is */ ... / which may be used if you need to have parentheses inside the comment. DATA GENERATION Page 69 Activities such as entering large volumes of data can be eased by using the data generation facilities. REPEATING ITEMS ON PREVIOUS RECORD A data item of the form *n where n is an un- signed integer, indicates that the next n items are identical to the cor- responding n items in the previous record. An isolated * is taken as *1. Double asterisks (**) indicate that the remaining items in the previous record are to be copied to the current record. REPEATING AN ITEM IN THE CURRENT RECORD - *=N, *=N+STEP An item of the form *=n, where n is an unsigned integer, indicates that the next n items are identical to the im- mediately preceding item. An item of the form *=n+step or *=n-step, where step is an unsigned real or integer, indicates that the next n items are to be generated by consecutively incrementing the im- mediately preceding item. GENERATING MULTIPLE RECORDS *+N A record beginning with *+n where n is an un- signed integer indicates that the next n records are to be generated from the preceding record. Each item of the generated record is formed by adding an item of the *+n record to the corresponding item of the immediately preceding record. A zero (integer) item should be in- serted in an *+n record for text items in the preceding record. The number of items after the *+n must match the number in the pre- ceding record. Notes on Generating Items Page 70 When increments are specified, either on the *+n record or as step on an *=n+step item they must match the item thye are incrementing in type. It should be noted that the *+n record generation optuion is based on the expanded represen- tation of the previous record. The generation does not operate on the card image of the preceding record if it contains data generation items. Therefore it is not possible to repeat or increment an asterisk-type item. Examples Consider the following 7 input records to il- lustrate data generation features: 1 2 3 4 5 6 7 8 9 10 11 12 2 1 *2 4 *=2 1 *=2+2 ** *+1 0 *=3 0 *=5 ** *+1 0 *=11 *+1 *12 *+1 ** ** Twelve data items are defined by each of these records. Each of the last six records is translated into the same internal record which is: 2 1 3 4 4 4 4 1 3 5 11 12 Note - the last 5 records could be replaced by the single record *+5 ** instead. Changing Special Characters It is possible to change the special characters the user interface uses to break apart records. These special characters may either be changed to others or set to null so they are ignored. This is useful for reading specially formatted files or to allow special characters Page 71 to appear as input in text items. To change special characters enter the following special comment as the only entry on a line between records: *(SET KEYWORD=newvalue) where KEYWORD can be DOLLAR, SEMI, QUOTES, BLANK, PLUS, or COMMA and newvalue is either the word NULL or the new spe- cial character. For example if one wanted to use dollar to delimit items rather than records and not to have commas delimit items one would enter: *(SET DOLLAR=NULL) *(SET COMMA=$) and commas could now be used in unquoted text strings. Note the function is altered, so for example the + sign still has its usual function in real numbers. To restore the original delimiters one could say: *(SET DOLLAR=$) *(SET COMMA=,) Page 72 Page 73 INDEX ATTRIBUTES 15 BLANK Command 38 BUILD KEY Command 31 CHANGE Command 29 CHANGE OWNER Command 30 CHANGE PASSWORD Command 31 CLOSE Command 12 COMPUTE Command 28 Data Base Creation Option 42 Data Base Update Option 42 DATE Command 38 Define RELATIONS 16 Define RULES 17 Define Submodule Commands 15, 18 DELETE DUPLICATES Command 29 DELETE KEY Command 31 DELETE ROW Command 29 ECHO Command 13 EXHIBIT Command 27 EXIT Command 14 HELP Command 9 INPUT Command 12 INTERSECT Command 32 JOIN Command 34 LINES Command 38 LISTREL Command 27 Load Submodule Commands 19 MENU Command 11 NEWPAGE Command 38 NOCHECK Command 14 NOECHO Command 13 OPEN Command 12 OUTPUT Command 13 OWNER password 15 PRINT RULES Command 28 PROJECT Command 35 Page X-1 Query Option 42 RELOAD Command 14 REMOVE Command 31 RENAME Attribute Command 30 RENAME RELATION Command 31 SELECT command 21, 22, 23 SUBTRACT Command 36 TALLY Command 26 TITLE Command 38 TOLERANCE Command 13 Type1 Attributes 16 Type2 Attributes 16 UNLOAD Command 39 USER Command 12 WIDTH Command 38 Page X-2